Made to last
Even though our taps are designed to be hardwearing, they can become affected by limescale. We know that many of you have hard water at home, so we’ve designed them so that you can remove the important elements (like the ceramic cartridges and the aerator) and clean or replace them.
All of our taps are made from brass, a metal alloy that’s a mix of copper (which makes them easier to make in a mould) and corrosion-resistant zinc.
Molton has a high-shine, cool-toned chrome finish that’s part of its contemporary feel, but that’s also completely timeless. The chrome coating isn’t just for aesthetics though – it makes Molton easier to clean too.
Most taps use either rubber washers or ceramic cartridges inside to control the flow of water. We use the latter because they’re much more resilient. They also give you more control, so the handle only needs to move a little to make a difference to the flow or temperature.
Also known as a flow regulator, an aerator is a small sieve-like piece that’s fitted discreetly into the end of the tap’s spout. Its job is to mix air in with the water so you’ll use less. It may take a little longer to fill your sink completely, but generally you won’t notice a drop in the pressure.
The pop-up waste is an extra feature of this tap that means you needn’t reach into the basin to unplug it: you control it with the lever mounted onto the back of the spout.
When it comes to smaller items, we don't hang around.
From our own, white-glove service for delivering larger pieces in the UK and Ireland, to our courier and international partners, rest assured that we’ve done everything we can to make sure your order gets to you on time and in one, perfect piece.
Delivery’s also entirely free if you’re in the UK and spend over £50 (or €100 in Ireland).
We believe that returns should be easy, which is why we approach them with a ‘no quibble’ mindset. And, you’ll also have 28 days to do so – just in case you need time to mull things over.
You want: easy-to-care-for pieces that you don’t need to tiptoe around. We’ve got: easy-to-read-through care guides that give you just that.
Need to knows
The maximum water pressure that our taps can take is three bar and the minimum is 1.5.
All our taps are WRAS (Water Regulations Advisory Scheme) approved, which means that they won’t contaminate your water or waste it unnecessarily.