Cranbrook ist unsere Interpretation der Nut-Feder-Verbindung, jedoch moderner und mit einer leicht verwitterten Oberfläche. Es ist eine großartige Alternative zu Farben, Tapeten und Holzpaneelen und verleiht Räumen eine warme, gemütliche Hüttenatmosphäre (allerdings nicht wie ein Ski-Chalet, sondern dezenter). Sie können Cranbrook in jedem unserer Farbtöne streichen lassen und Ihre Wände oder Decken damit schmücken.
Design und Technik
The materials
Cranbrook is created from sturdy Polish spruce and pine, and we’ve coated it in a wash of our pale taupe-grey Silver Birch paint – a classic, warm neutral that’s easy to mix and match with other colours. You can also order the boards in any of our current and archive shades – each one will take on a different character depending on the hue you choose. For instance, whites like Salt have a clean, Scandinavian look, Aqua Blue feels nautical, and Moss and Cactus will give your space a fresh feel.
In the making
Made from start to finish in Poland, the wood is first cut from a timber log then laid out to dry naturally. This steady drying process takes between four to five weeks and allows the raw wood to adjust to its surrounding humidity slowly, which prevents it from cracking and splitting. The next step is to brush the wood to give it the texture shiplap is best known for. Each board is then packaged manually into plastic-free boxes which aren’t only better for the environment, but also allow the wood to breathe and adapt gradually to atmospheric conditions as it travels.
Where we see it
It’s normal for natural wood to shrink or bend slightly over time, but this is largely down to temperature and humidity changes. With that in mind, the best areas to use your shiplap boards are on walls and ceilings in dry conditions where these factors are fairly consistent. Use Cranbrook in a living room, dining space, kitchen, bedroom or hallway rather than a bathroom or next to a fireplace or radiator.
Doing the right thing
Our long-lasting Cranbrook boards are made from Polish spruce and pine which are FSC-certified to ensure our timber is sourced responsibly. To reduce environmental impact, our trusted partner has also eliminated foil and plastic packaging and uses paper tape to secure each parcel.
Wir nehmen unseren Lieferservice sehr ernst. Neptune-Transport, Neptune-Mitarbeiter, Neptune-Service.
Das Team der Filiale, bei der Sie Ihre Bestellung aufgegeben haben, wird Sie über den Ablauf, die Dauer und die Kosten der Lieferung informieren. Bitte kontaktieren Sie die Filiale oder schicken Sie eine E-Mail an international@neptune.com, um weitere Informationen zu erhalten.
Kulante Retouren
Wir finden, Rückgaben sollten so unkompliziert wie möglich ablaufen. Deshalb haben Sie bei uns ein Rückgaberecht „ohne Wenn und Aber“. Wir bieten Ihnen einen kostenfreien Rücksendeservice für Accessoires. Alle Einzelheiten zum Rückgabeverfahren finden Sie auf Ihrem Lieferschein. Alles was Sie tun müssen, ist die Verpackung aufzuheben. Unsere vollständigen Rückgabebedingungen finden Sie hier.
Pflege & muss wissen
Care guide
To clean, use a brush or vacuum.
Remove marks with a hard brush or water-soaked cloth.
Our fitting advice
Wood will naturally move slightly as it adjusts to temperature and humidity, and with this particular combination of spruce and pine, this can happen between five and ten days after the boards have reached their new home. So, prior to fitting, we recommend that you let them rest for this amount of time once the packaging has been removed. Before securing the boards to a wall, we also advise that you seek guidance from a professional to determine the load bearing.
Cranbrook comes in 3.5m lengths and can be nailed straight into the joists on a ceiling or, to fix them onto a wall, the best way is to screw battens to the surface then nail the boards on top. When fixing the boards, we suggest you don’t use anything other than 16-gauge (1.6mm thick) or 18-gauge (1.2mm thick) nails, and make sure they are at least 3cm away from the edge to prevent cracking. If you need to use screws or larger nails, make sure you create a pilot hole first to stop the wood from splitting.
