How it works
There are two levers on this tap: one which moves backwards and forwards to give you normal hot or cold water (you just pull it out to turn it on); and another which gives you near-boiling water. You can set the temperature of this one between 75°C and 99°C, and it has a locking mechanism so you don’t need to worry about accidentally turning it on.
This tap is made from low-lead brass – an industry standard that means it’s safe to drink from and incredibly hard-wearing. It also has a durable, high-shine and easy to care for chrome finish.
Most taps have either rubber washers or ceramic cartridges inside to control the flow of water. These use the latter because they’re much more resilient. They also give you more control over the flow, so the levers only need a small turn to be fully on.
Also known as a flow regulator, an aerator is a small sieve-like piece that’s fitted discreetly into the end of the tap’s spout. Its job is to mix air in with the water so you’ll use less. It may take a little longer to fill your sink completely, but generally you won’t notice a drop in the pressure.
Made to last
These taps are made to last, but there are parts that are more likely to get damaged, particularly by limescale, such as the ceramic cartridges and aerator. But you can remove these to replace them, and spares are available from Perrin and Rowe.
When it comes to smaller items, we don't hang around.
From our own, white-glove service for delivering larger pieces in the UK and Ireland, to our courier and international partners, rest assured that we’ve done everything we can to make sure your order gets to you on time and in one, perfect piece.
Delivery’s also entirely free if you’re in the UK and spend over £50 (or €100 in Ireland).
We believe that returns should be easy, which is why we approach them with a ‘no quibble’ mindset. And, you’ll also have 28 days to do so – just in case you need time to mull things over.
You want: easy-to-care-for pieces that you don’t need to tiptoe around. We’ve got: easy-to-read-through care guides that give you just that.
Need to knows
The maximum water pressure that our taps can take is three bar and the minimum is 1.5.
All our taps are WRAS (Water Regulations Advisory Scheme) approved, which means that they won’t contaminate your water or waste it unnecessarily.